Battery Chargers & Power Supplies
Charge up to 4 batteries at the same time. Any combination of cell type or number of cells
Optimized operating software
Quattro B6 features the so-called AUTO function that set the feeding current
during the process of charging or discharging. Especially for Lithium batteries, it
can prevent the overcharging which may lead to an explosion due to the user's fault.
It can disconnect the circuit automatically and alarm once detecting any malfunction.
All the programs of this product are controlled to achieve the maximum safety and minimize the trouble.
All the settings can be configured by users!
Internal independent lithium battery balancer
Quattro B6 employs an individual-cell-voltage balancer. It isn't necessary to
connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, Quattro B6 can monitor and balance each
cell of the battery individually. Error message will be indicated and the process will
be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
Quattro B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
The maximum five batteries' data can be stored for users' convenience.
You can keep the data pertaining to program setting of the battery of continuous
charging or discharging.
Users can call out these data at any time without any special program setting.
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge
is operable for battery refreshing and balancing to stimulate the battery's activity.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of
charging, whereas 'store' state can control the final voltage of your battery, so
as to store for a longtime and protect useful time of the battery.
Delta-peak sensitivity: The automatic charge termination program based on the
principle of the Delta-peak voltage detection. When the battery's voltage exceeds
the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or
NiMH battery; it is useful for the NiMH battery of low impedance and capacity in
the 'AUTO' charging mode.
The charging capacity is always calculated as the charging current multiplied by time.
If the charging capacity exceeds the limit, the process will be terminated automatically
when you set the maximum value.
The battery's internal chemical reaction will cause the temperature of the battery to rise.
If the temperature limit is reached, the process will be terminated. * This function is
available by connecting optional temperature probe, which is not included in the package.
PC based analysis uing USB Communication
Quttro B6 offer PC based program can analysis the characteristic of the
battery via USB port. It shows a graph of voltage, current, capacity curves. It also shows
the individual voltage of each cell in the Lithium battery pack.
PC-LINK USB adaptor can be purchased separately
Input voltage: 11-18V DC
Total circuit power: 200Watts(4x50W)
Charging current: 0.1-5A
Operating voltage range: DC 11-18 Volts
Circuit power: Max. charge power 50W
Max. discharge power 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300mA/cell
NiCd/NiMH battery cell count: 1-15cells
Li-ion / LiFe/ LiPo cell count: 1-6cells
Pb battery voltage: 2-20V
Net weight: 277g
Charge at home on 240v or in the field on 12v. The B6-AC handles both!
The IMAX B6-AC is a rock solid charger thats able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries.
This is not a copy. It is a genuine IMAX B6AC. Comes with Australian 240v plug lead
AC 240v or 12V DC input
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
Input Voltage: 11~18v or 240v AC
Circuit power: Max Charge: 80W
Charge Current Range: .1~6.0A
Discharge current range: .1~2.0A
Ni-MH/NiCd cells: 1~15
Li-ion, LiPo, LiFe cells: 1~6
Pb battery voltage: 2~20v
JST-XH balance board
For use with the Quattro B6 charger. Only 1 JST-XH board is supplied with the charger. You will need 3 extra of these to balance charge 4 Lithium batteries
iMax Duo B6 400W battery charger
This B6 Duo has all the power you need to get your batteries charged in no time!
With two channels capable of 200W each, this charger packs quite a punch, especially with many new lipos capable of being charged at 5C rates.
The B6 Duo can handle up to 6S of Lithium batteries per channel and up to 18 cells NiCd/NiMH. It also has an internal cell balancer,
so you won't need an external balancer when charging Lithium batteries.
Operating voltage range: DC 11. 0-18.0 Volt
Circuit power: Max. Charge power 2x200Watts
Max. Discharge power 2x25Watts
Charge current range: 0.1-10.0A
Discharge current range: 0.1-5.0A
Current drain for balancing Li-Po/Ion/Fe: 300mA/cell
Li-ion/Fe/Polymer cell count: 1-6cells
NiCd/NiMH battery cell count: 1-18cells
Pb battery voltage: 2-20V
Net weight: 727g