Servo's, Switches, Extensions
 
Tower Pro MG996R Digital Servo             
MG996R       weight- 55.0g                                             
Full Metal Geared, Digital
Dimension  40.7x19.7x42.9mm
Stall torque 9.4kg/cm (4.8V),11kg/cm (6V)
Operating speed 0.17sec/60degree (4.8v), 0.14sec/60degree (6v)
Operating voltage 4.8-7.2V
Temperature range 0℃_ 55℃
Dead band width 5us                                             
It now has a redesigned PCB and IC control system  which makes it far more accurate.                    
Its internal gearing and motor are also upgraded to improve deadband width and centering.
This servo is far more accurate, and safe to use in aircraft  which require precise movements and centering
$16.50 ea
.  
Beware the copies with the shiny black case
Power Hd Digital Servo's
Click on the link to take you to the Power HD servo page. Awesome servo's at a realistic price
                        Servo  Extensions        
 All extensions are heavy duty 22 AWG twisted wire fitted with J/R leads


                                150mm extension     $3.50



                                300mm extension     $3.70



                                450mm extension     $3.90



                                600mm extension     $4.10



                                900mm extension         $5



                                 1.2M Extension          $5.75



                                150mm Y lead       $3.60 



                                300mm Y lead       $4.10

Lengths
Heavy duty Rx Switch with charge jack and green LED. JR connectors  
                           $9 
Servo safety clips. These are a must have safety item. Every servo extension and Y lead should be made secure with these clips.
$5 for a pack of 10 clips
,

Dionysus Design Servo Rate Reducer
This servo rate reducer is designed for airplanes where minimal weight is crucial. It uses the latest microprocessor technology to slow down the servo signal so landing gear and other mechanical systems are not damaged by fast servos.
Features:
Slows down the servo signal so full range movement takes 4 seconds
Designed for use with 2 or 3 position transmitter switches
Can be used with 2 servos by using a Y-cable (if one of the two servos needs to be reversed we also recommend the use of a Servo Reverser)
Only works with std servos, not retract servos
$14
with free post

Dionysus Design Servo Stretcher
The Dionysus Design Servo Stretcher will take the normal 90 degree servo signal from the receiver and stretch it out so the servo actually moves 180 degrees. Most servos can go up to 180 degrees, however the transmitter limits the range to about 90 degrees. This servo stretcher will double the signal range. Excellelent for mechanical retracts etc
$14
with free post
Servo Reverse Y Lead
Used for flaps or elevators. Reverses the direction of one servo.
Has an adjustable pot for matching the center position on one servo
$17.50

HobbyWing 8A UBEC
Specifications
Output Voltage/Current (Cont./Peak): 5V@8A /15A or 6V@8A/15A  (adjust via control switch)
Quiescent Current:60mA
Input Voltage:6-12.6V (2-3S LiPo)
Two Power Output leads/Ferrite ring
Size:42x39x9mm (LxWxH)
Weight:36g
                   $19
Body is CNC machined aluminium. Switch is a heavy duty toggle switch. Charge port.
 These are a very heavy duty switch.
Wires are 22AWG. Capacity 20A for 10 minutes
  
$16
Body is CNC machined aluminium. Switch is a heavy duty toggle switch. Charge port. Inbuilt fuel dot. These are a very heavy duty switch.
Wires are 22AWG. Capacity 20A for 10 minutes
   $28
Twin Power switch. Can be used as a redundant switch or one for Rx and the other for the engine CDI. Two power inputs and two power outlets. Two charge ports. Heavy duty toggle switches. Body is CNC machined aluminium. 22AWG wires. Capacity 20A for 10minutes
  $30 
Twin Power switch with fuel dot. Can be used as a redundant switch or one for Rx and the other for the engine CDI. Two power inputs and two power outlets. Two charge ports. Heavy duty toggle switches. Body is CNC machined aluminium. 22AWG wires. Capacity 20A for 10 minutes
   $34 
Velcro straps x 4
20mm x 300mm
    $4.50